 |
| The construction of the Ram Bot |
 |
| The finished Ram Bot #1 |
The ram bot (as you guessed) rams things. It is based on a bull and when it sees the color red it charges. The build is quite simple. What you have to do is, attach two motors onto the bottom of the NXT brick using two long sticks. Then to attach the wheels you simply put a fairly long stick through the orange motor drive and put on the wheels. to do the back wheels you have to simply put a 3x4 curved stick on the sticks that connect the motors to the NXT brick and put the wheels through. After that you need to construct the ultrasonic sensor. To do that you need to put at 15 stick on the sides and put 5 5 long sticks on either side connecting the ultrasonic sensor to the front. Then you must connect the color sensor on to it. You must put two long sticks through the color sensor and then put three 7 long sticks on the sides and connect it with 3x4 curved sticks. Then to connect the back push sensors............ I'll let you figure that out!
 |
The finished Ram Bot #2
|
Watch me build the Ram Bot here!
Watch how I programmed the Ram Bot here!
